Xbox Series X Dolby Vision HDR settings can make games look richer and more lifelike — or, set up wrong, washed out and flat. Dolby Vision is a form of HDR that adjusts brightness scene by scene, and the Series X supports it for gaming on compatible TVs. This guide explains what it does, how to turn it on, and when HDR10 is the better choice.
Before you change anything, know the one requirement that trips people up: your TV must support Dolby Vision for gaming, not just for films. A TV that plays Dolby Vision movies may still not accept a Dolby Vision signal from a console. Check your TV’s gaming features first.
Xbox Series X Dolby Vision Setup
Start on the console. Go to Settings, General, TV and display options, then Video modes. If your TV supports it, you will see an option for Dolby Vision for gaming. Turn it on, then run the HDR calibration that follows — Dolby Vision has its own calibration, and skipping it is the most common reason the picture looks wrong.
Next, check the TV. Some TVs need Dolby Vision enabled per HDMI input, or need the input set to a high-bandwidth mode before the option appears at all. If the console option is greyed out, the TV side is the place to look: check the input mode, the Game Mode setting, and whether the TV’s firmware is up to date.
- Enable Dolby Vision for gaming in the console’s Video modes.
- Run the Dolby Vision HDR calibration straight after turning it on.
- If the option is greyed out, check the TV input mode and firmware.
- Calibrate in the lighting you normally play in.
Xbox Series X HDR10 vs Dolby Vision
HDR10 is the standard HDR format. It sets one brightness range for a whole game or film and holds it. Dolby Vision adjusts brightness scene by scene, which can give brighter highlights and deeper shadows in the same image. In theory, Dolby Vision is the richer picture. In practice, the difference depends on your TV and the game.
HDR10 has one advantage that matters: it works on more TVs, and it is the format most games were tuned for. If your TV supports both, try Dolby Vision first and compare it with HDR10 in the same game. If Dolby Vision looks washed out or dim on your set, HDR10 is not a compromise — it is the right choice for that TV.
Some games also behave differently between the two. A game tuned for HDR10 may look slightly off in Dolby Vision, and a game with Dolby Vision support may shine in it. There is no universal winner; there is only the better picture on your TV in the game you are playing.
| Format | How it works | TV support | Best when |
|---|---|---|---|
| HDR10 | One brightness range for the whole game | Most HDR TVs | Widest compatibility, games tuned for it |
| Dolby Vision | Adjusts brightness scene by scene | Compatible TVs only | Your TV handles it well and the game supports it |
| No HDR | Standard brightness range | All TVs | Older TV or HDR looks wrong |
Best HDR Settings for Series X
Whichever format you choose, the calibration matters more than the format. Run the console’s HDR calibration app and adjust the sliders until the test squares just disappear. Do it in your normal playing light, because a calibration done in a dark room at midnight will look wrong on a bright afternoon.
In the TV settings, turn off motion smoothing and any extra picture processing for the gaming input, and turn on Game Mode. Those processing features add delay and can fight with the HDR signal. Sharpness should stay low or neutral — high sharpness adds artificial edges that HDR makes more obvious.
If a game has its own HDR brightness slider, use it. The console calibration sets the baseline, but individual games are tuned differently, and a small adjustment in the game’s own menu often fixes a picture that looks slightly too bright or too dark.
Dolby Vision Gaming on Xbox Series X: When to Turn It Off
Turn Dolby Vision off if games look consistently washed out, if the picture is noticeably dimmer than HDR10 on the same TV, or if you see flickering when the scene changes. Those are signs your TV is not handling the signal well, and HDR10 will give you a better picture on that set.
Also turn it off if you notice extra input delay. Some TVs process Dolby Vision more slowly than HDR10, and in a fast game that delay is easy to feel. A slightly less rich picture with a responsive feel beats a richer picture that lags behind your controller.
None of this is permanent. You can switch between Dolby Vision and HDR10 in a minute, so treat it as an experiment, not a commitment. Pick the setting that looks best on your TV, in your games, in your room.
Xbox Series X Dolby Vision HDR Settings: FAQ
Does my TV support Dolby Vision gaming on Xbox Series X? It must support Dolby Vision for gaming specifically, not just for films. Check the TV’s gaming features and firmware, and look for the option in the console’s Video modes.
Is Dolby Vision better than HDR10 for gaming? It can be richer because it adjusts scene by scene, but it depends on your TV and the game. If it looks washed out or dim, HDR10 is the better choice on that set.
Why is the Dolby Vision option greyed out on my Series X? Usually the TV input is not in high-bandwidth mode, the TV needs a firmware update, or that input does not support Dolby Vision gaming.
Do I need to calibrate HDR after turning on Dolby Vision? Yes. Run the console’s HDR calibration after enabling it, in your normal playing light, or the picture is likely to look wrong.
For the wider picture setup, our Xbox Series X 4K gaming settings explained guide covers resolution and refresh rate, and the Xbox controller compatibility guide covers the pads for your setup.

