Thursday, November 19

    Learning how to set up PS5 4K 120Hz takes a few minutes, but it only works when every part of the chain supports it: the console, the cable, the TV port, and the game itself. This PS5 120Hz setup guide walks through each step, from the HDMI cable to the PS5 4K TV settings, so you can check whether your screen is ready and turn on 120fps mode in the games that offer it.

    Start with the basics. The PS5 needs an HDMI 2.1 cable and a TV with an HDMI 2.1 port to output 4K at 120Hz. The cable in the PS5 box is an HDMI 2.1 cable, so use that one unless you have a known-good replacement of the same standard. Plug it into the HDMI port on your TV that supports 4K 120Hz, which is often labelled as the gaming port or the 120Hz port. Check your TV manual if the ports are not labelled, because not every HDMI port on a 4K TV supports the full bandwidth. For more on this, see our Best TV for PS5: Top Picks for 4K and 120Hz Play.

    How to Set Up PS5 4K 120Hz: The Console Settings

    On the PS5, go to Settings, then Screen and Video, then Video Output. Set Resolution to Automatic or 2160p, and check the Video Output Information screen to see what your TV reports. If the TV supports it, you should see 120Hz listed among the supported refresh rates. Then turn on Enable 120Hz Output under the Video Output settings and set it to Automatic. With that done, the PS5 will use 120Hz output in games that support it, and fall back to 60Hz elsewhere.

    • Use the HDMI 2.1 cable from the PS5 box.
    • Plug into the TV port labelled 4K 120Hz or Game.
    • Set PS5 Resolution to Automatic or 2160p.
    • Set Enable 120Hz Output to Automatic.
    • Turn on Game Mode on the TV for the lowest input lag.

    PS5 HDMI 2.1 Setup and TV Settings That Matter

    Game Mode is the TV setting that matters most after the port choice. It cuts input lag by turning off extra picture processing, and on most TVs it is the only way to get a responsive feel at 120Hz. Turn it on for the HDMI input your PS5 uses. Some TVs apply Game Mode automatically when they detect a console, while others need you to switch it on by hand for each input. While you are there, check that the TV input is set to Enhanced or 4K 120Hz mode, because some TVs ship with their HDMI ports limited to a lower bandwidth by default.

    If your TV has a variable refresh rate setting, turn it on too. Variable refresh rate smooths out frame-rate changes in games that support it, and it works alongside the 120Hz output. If you use a soundbar or receiver, connect the PS5 to the TV first and use the TV audio output to the sound system, unless your receiver also has HDMI 2.1 ports that pass 4K 120Hz through. A receiver with older HDMI ports in the chain will cap the signal and stop 120Hz working.

    PS5 Enable 120fps Mode in Games

    Turning on 120Hz output does not make every game run at 120 frames per second. Each game has to offer a 120fps or performance mode, and you have to select it in that game settings. Many games put the choice under Display, Graphics, or Performance settings, with options such as Fidelity and Performance. Choose the performance or 120fps option. Some games also need the PS5 system setting for Game Presets set to Performance Mode, which you will find under Settings, then Saved Data and Game/App Settings, then Game Presets.

    Not every game offers 120fps, and some that do drop resolution to reach it. That trade is normal: the console renders fewer pixels per frame so it can render more frames per second. If a game looks softer in 120fps mode, that is the reason. Try both modes for a few minutes and pick the one that feels better to you, rather than assuming the higher frame rate is always the right choice.

    Troubleshooting PS5 4K 120Hz Problems

    If 120Hz does not appear in the PS5 Video Output Information screen, work through the chain in order. Check the cable is HDMI 2.1 and fully seated at both ends. Check the TV port supports 4K 120Hz. Check the TV input is set to Enhanced mode and Game Mode is on. Check there is no older receiver or HDMI switch in the chain. If the screen goes black after a change, wait: the PS5 reverts the video setting after a short delay if you do not confirm it. For a deeper look, see our PS5 HDMI No Signal Fix: Steps That Work.

    SymptomLikely causeFix
    No 120Hz listedWrong TV port or cableUse HDMI 2.1 cable in the 120Hz port
    Black screen after changeTV cannot hold the signalWait for the PS5 to revert, then retry
    120Hz works but laggyGame Mode offTurn on Game Mode for that input
    No 120fps option in gameGame does not offer itUse Performance Mode where offered
    Picture drops outCable or switch in chainConnect PS5 direct to the TV

    FAQ: How to Set Up PS5 4K 120Hz

    Do I need an HDMI 2.1 cable for PS5 120Hz? Yes. The cable in the PS5 box is HDMI 2.1, and that is the cable to use. An older cable may still carry a picture, but it may not carry 4K at 120Hz.

    Does every PS5 game support 120fps? No. Only games that include a 120fps or performance mode can run at that frame rate, and you have to select the mode in the game settings.

    Why does my TV say 4K 120Hz but the PS5 shows 60Hz? The most common causes are the wrong HDMI port, the TV input not set to Enhanced mode, or an older receiver or switch between the console and the TV. Check each link in the chain.

    Is 120Hz worth it on PS5? If you play fast shooters, racing games, or competitive titles, the smoother motion and lower input lag are easy to feel. For slow story-led games, the difference is smaller, and the fidelity mode may suit you better.

    Once your screen is set up, fine-tune your aim with controller aim settings for shooters and check which pads work with your setup in PS5 controller compatibility.

    Share.